English (United States)
Call us! 512-349-0334 or (877) INDUSOFT

Temperature Control Faceplate

Name: TemperatureControlFaceplate_01

Range (if applicable): -99.9 to 999.9


This symbol is a Temperature Controller face plate. It has limits for Minimum and Maximum values, PV value and Set Point value. The user can click on the set point value and use a popup keypad (if it is enabled in the project settings) to directly enter a value. The up and down buttons will increment/decrement by .1 if touched (clicked) and by 1 repeating if held down. It also displays the output status


  1. Made of 100% native InduSoft Web Studio objects, no pictures.

  2. This symbol was created primarily for use on a PC running on a desktop or server operating system, but with some slight modifications, can be made to look great on Embedded Operating Systems. You should have “Enable Enhanced Graphics” turned on in the Project-Viewer settings.

  3. Units (F or C) are not part of the symbol, just add “F” or “C” to the label if you need to show units.

Ideas for improvement:

  1. Alternative color backgrounds

  2. Create different sizes (need a different size, just let us know!)

  3. Allow for configurable increment/decrement values

  4. Add a simple trend of the PV and output to understand the reactions quickly

Here’s how to use this symbol:
Unzip and copy the .sym file into your Symbol folder of where InduSoft Web Studio is installed. This is usually “C:\Program Files (x86)\InduSoft Web Studio v7.1\Symbol” or similar. Either create a new folder or copy it into an existing one, such as “Temperature Control”.

Download Temperature Control Faceplate Here! 


Visit the forum thread for the Temperature Control Faceplate


We encourage you to modify and share these symbols with other users. Your symbol might be perfect for someone else, or they might make an ideal symbol for you. We want your feedback, so tell us what symbols you want us to create for the next “Symbol of the week”! Tell us in this short survey