English (United States)
Call us! 512-349-0334 or (877) INDUSOFT

InduSoft Web Studio Forums

Find additional forum posts in in the Forum Archives. For assistance view the Forum Frequently Asked Questions.

How to not show ->AlrDisable in the alarm object?
Last Post 01 Jun 2019 03:17 AM by Elias Doukas. 2 Replies.
Printer Friendly
  •  
  •  
  •  
  •  
  •  
Sort:
PrevPrev NextNext
You are not authorized to post a reply.
Author Messages Not Resolved
Thoft#99User is Offline
New Member
New Member
Posts:1


--
14 May 2019 02:44 AM
    I have a solution where we have to be able to disable/inhibit some alarms.

    We have solved how to use the ->AlrDisable to disable the alarms, and also how to show them or not, if either ->AlrDisable or the alarm state changes.

    But I can't figure out how to avoid show the alarm in the alarm object, if I disable the alarm while the alarm is active. Will I be able to filter out those ->AlrDisable alarms using filter expressions?

    Thanks

    /Kenneth
    FonsCarverUser is Offline
    New Member
    New Member
    Posts:1


    --
    21 May 2019 12:28 PM
    Hi....the first thing to do is, try and determine just why it's going off in the first place. Typically, the jacks down alarm means at least ONE jack has not retracted all the way up. Since you have an '04 era Journey, I'm presupposing you have an HWH leveling/slide system, correct? If so, has this done this before, the alarm I'm talking about? Is this the first time?

    Elias DoukasUser is Offline
    Basic Member
    Basic Member
    Posts:16


    --
    01 Jun 2019 03:17 AM
    Hello,
    I had the problem one year back. The solution worked for me:

    In the project folder, edit the following settings in the [Options] section of the
    <ApplicationName>.APP file:
    RemoveOnAlarmDisable=1
    InsertOnAlarmEnable=1

    Hope it helps.

    Elias Doukas
    You are not authorized to post a reply.